Do you want to work out efficiently at your home gym, even if you live in a smaller living space? The Titan T-2 Series Power Rack is the perfect solution! This rugged piece of bodybuilding equipment reduces fat and pumps up muscle mass, so you can work toward a fit, trim physique. This lifting cage allows you to work out many different muscles, including your abs, biceps, triceps, pectorals, and more. With this power rack, you’ll be able to incorporate a wide variety of different exercises to improve your workouts. This rack is perfect for pull-ups, chin-ups, squats, bench presses, and more. You can get creative with this versatile tool! If you want to do bench presses or skull crushers, simply place a bench underneath the power rack. This power rack is made from 11-gauge steel for long-lasting durability. Its powerful construction ensures that you can work out with it for years. Setting up this rack is also super simple! It comes with J-hooks for quick and easy installation. The bolt-together construction allows you to easily transport this rack, and its small size means you can easily move it into any room or basement! This squat rack contains steel tubes that are 2” x 2” with a pull-up bar that measures at 1.25″ in diameter. This rack measures 71.5” high. The power rack also has a depth of 45”. The whole cage weighs approximately 93 lbs. and fits in a 48” x 58” area. Add the Titan T-2 Series Power Rack to your collection of professional fitness supplies today!
GREAT FOR IMPROVING FORM: The purpose of working out is to strengthen your muscles, not hurt them! That’s why it’s vital to practice good form while you’re lifting weights. The Titan T2 Power Rack is designed with your safety and comfort in mind. It includes dip bars and other features designed to safely optimize your workout.
BUILD STRONG MUSCLES: This short Titan Power Rack is a must-have! This piece of equipment can fit in small basements that won’t accommodate standard power racks. You can perform a variety of exercises with this rack, including chin-ups, dips, curls, deadlifts, and squats. If you want to do bench presses, place a bench underneath and you’re good to go. In no time, you’ll be looking fit and trim!
DIMENSIONS: This durable steel power rack weighs about 123 lbs. It has a total height of 71.5″, has a 44-inch opening, and has a depth of 24”. It takes up 48” x 58” of the floor. The steel tubes are 2” x 2”. The pull-up bar is 68.5” off the ground. This compact rack is perfect for your home gym, basement, or garage. Add this amazing rack to your collection today.
STURDY STEEL CONSTRUCTION: Our power rack is a fantastic investment for both serious athletes and beginners alike! It’s made from heavy-duty steel for durability. Its all-steel structure ensures that it will hold up for years without damage. The powerful steel frame is also strong enough to hold a capacity of up to 700 lbs.
QUICK & EASY ASSEMBLY: Don’t waste time with excess hardware and complicated construction. Setting up your power rack with all your workout gear and accessories is simple. This set comes with all necessary hardware, including J-hooks. With Titan products, you’ll spend less time assembling your new equipment and more time using it!

The Best Power Rack Under $300? A Comprehensive Look at the Titan T-2

Table of Contents

Overview

Titan’s T-2 power rack first came out in 2013. At the time it was the only 11-gauge power rack you could find under $300, and I think it still is?

Right to the point. If you doubt whether a 2″x2″ tubing rack is suitable for you, check this out. Here’s competitive powerlifter BJ Whitehead squatting 720lb on the Titan T-2.

Before seeing this, I never would have expected the rack could take that much weight, or more so that an experienced lifter like him would trust it to do so, until I also noticed that the rack is made of 11-gauge steel. That makes a difference.

Most notably, you can see that he has the storage pegs on the back bottom of the rack heavily loaded with plates to keep it from sliding or tipping, which is what they’re designed to be used for.

On that note, any otherwise lightweight racks like this redeem themselves by having weight storage pegs in back that you can use to load the unit down. When you do that, it’s a little like having a super heavy duty rack with 3″x3″ tubing. So it’s all a matter of whether you have the extra plates to spare to make this a good option for you. I like the positioning of the storage pegs. The plates will not interfere with your range of motion, unlike some bad designs where the plates are stored on the same upright as the J-hooks. Those type of designs are at best annoying, and at worst dangerous if you aren’t conscientious about it.

I like the extended feet on the base too, shown below compared to another brand.

Titan T-2 on the left. The feet are extended out to not only the front and back, but to the sides, which increases the space you need but also gives extra stability and the option to load the rear with plates to keep it down.

I don’t think the ones going out to the sides in the back do much, because a rack doesn’t hardly ever tip sideways (unless you use their dip attachment I guess), but the ones sticking way out in the front, plus the extra frame in the back for the aforementioned weight pegs, helps keep it stable even if you don’t weight it down. It does make for a big footprint though, which could be bad if you’re as short on room space as you are on height.

The T-2 is made of 11-gauge steel and weighs 132 lbs. The product page does not say it’s 11-gauge, but I confirmed that with Steven at Titan Fitness. The 11-gauge steel is really what makes this rack stand out among other racks with 2″x2″ tubing. It’s why you can load up so much weight on it. If you aren’t familiar with steel gauge measurements, the lower the number, the thicker the steel. 11-gauge is about a 1/8″ wall thickness. It’s hard to find a rack with tubing that’s lower (thicker) than 11-gauge, even those with super heavy duty 3″x3″ tubing.

The tubing and steel gauge both affect how much the rack can wobble as you do pull ups. Therefore, be aware that this rack is not rock-solid feeling like 3″x3″ 11-gauge steel racks. Sorry folks, you can only get so much at this price.

Mike Seiber shared a video review of the T-2 that someone else had in his home gym a few years ago. It wasn’t his, but another person’s video that he wanted to share on his (now-defunct) blog.

This was a 2013 model. That brings us to the changes they’ve made since then…

Improvements Since 2013

I’m writing this in 2018. Titan listened to customer feedback about the early models in 2013-2015 such as Mike’s above and incorporated the upgrades and fixes into the latest models. So a current model T-2 has no model name change, but it is not the same rack as an early one.

The uprights’ holes were cut in a way that bent the tubing in a little from the force of the tool against the tubing. Titan since moved to a different method that does not cause this.

The alignment on welded parts was sometimes off, and there were burrs (sharp spots) on some welded areas. Titan resolved this so the parts are welded together straight and there aren’t burrs left over.

Attachments – The Good and Bad

One thing about Titan is they have a big assortment of attachments for all models of their racks. Not just a few basic things like dip bars or a lat attachment, things that you’ve already seen for years in older racks.

They keep adding to the pile of available attachments, adapting them as necessary for their other larger or more heavy duty racks that have different tubing sizes like the T-3, X-2, X-3, etc.

The coolest thing is they have a monolift!

This Youtuber gave no info on what rack this is. I can tell you it isn’t the T-2, but anyway you can see how a monolift works. It allows you to unrack the weight and start squatting without “walking back” the bar away from the rack. The walk-back saps valuable energy and causes you to not get your feet just right. Similar with benching: you don’t have to do that awkward un-racking of the bar above your forehead and move it over your chest, which isn’t even possible when you’re near your max without a partner to help.

In either situation, if you have a person on each side to flip the monolift hooks out again, you can re-rack the weight without walking/pushing it forward as well. All the benefits of a Smith machine and none of the friction or restriction in your natural range of motion.

Another necessary add-on you may need right away is a second set of J-hooks:

If you’re doing some exercises outside the rack, or you want an extra pair so you don’t have to keep moving them back and forth between squat and bench press height, get another pair of J-hooks. These J-hooks above are UHMW padded, to protect your bar knurling and reduce noise. The ones included with the T-2 are all steel, with no UHMW padding to protect the bar. It’s one of the many ways they cut down on costs.

The 20″ outside spotter arms will save your butt if you need it while doing things outside the rack like overhead presses (there’s not enough height inside for that). It’s a bad leverage point though for heavy rack pulls, which would otherwise be best done on these outside spotters because of the UHMW padding that the inside spotter bars don’t have. Maybe load up the storage pegs in back first and give it a careful test.

Those are the top few attachments I personally would consider. The rest are not strictly necessary. They have a double dip attachments, but then I’m not a fan of dips. If you really want to do dips, you can do them on a budget by laying two olympic bars across the safety bars.

Skip These Attachments

Some attachments are questionable. The extension kit for the rear of the rack, with 8 storage pegs, gives you room to store all your plates, away from the main uprights of the rack so they won’t get in the way. That’s fine and dandy, but at that point you’re venturing into the territory of what some more pricey racks already have built-in. If you already had the rack, it wouldn’t be a bad addition, but think twice about what you really want if you’re planning on adding this to it straight away.

Related to that, the plate storage pegs add-ons are useless. They would have to be mounted on the main uprights, getting in the way of your lifts, unless you get the extension kit above that already includes them.

That being said, one youtuber shows off this T-2 rack with the dip bars.

The Shortie Model

Titan makes a shorter model of this rack that is only 71.5″ high (just under 6ft).

Don’t be confused by differing measurements Titan gives on its product pages. Last I checked, some of the info was not accurate if you compare the specs between the two. Trust me, the Short rack is the exact same as the regular one, only shorter. The dimensions, steel and parts are all the same, with the only difference being the height the uprights are cut to and correspondingly the number of holes cut into them.

This pic (screenshot from a video further above) shows the height difference and hole heights in the T-2 and T-2 Short. He is 6’2″, and the Short would not work for him.

You can get the T-2 rack direct from Titan Fitness.

Anything else you want to know about the rack? Leave a question below!


Titan T2 vs T3: Which power rack should you buy?

Looking for a high-quality but affordable power rack for your home gym?

Titan is one of the best names around when it comes to reasonably priced equipment.

(That doesn’t suck…)

When it comes to Titan power racks, you’ll probably be looking at the company’s two marquee products, the T2 and T3 racks.

These two choices are similar in a lot of ways, but also have some pretty important differences. In this article, I’ll break down the Titan T2 vs T3 so you can figure out which power rack is a better fit for your home gym.

We’ll look at:

  • Price
  • Size
  • Weight Capacity
  • Features
  • Reviews
  • And more

First up, here’s a comparison chart that should cover most of you what you need to know.

Overall, the Titan T-3 is a better, more fully-featured, and sturdier rack than the T-2. However, it’s quite a bit pricier and a good bit taller, as well, which could be a challenge for garage and basement gyms.

The T-3 is the better rack for more advanced lifters with the budget and space to make it work, while the T-2 is an awesome starter or budget rack.

Weight Capacity Height Best for Price
Titan T2 700lbs 83″ Tight budgets & novices Check on Amazon
Titan T3 1,000lbs+ 92″ Super strong lifters Check on Amazon

You can also get both of these racks directly from Titan Fitness for free shipping & a much better selection of colors, accessories, and more. Click my link to check them out.

(Quick Note: The Titan T2 comes in an extremely popular short version for low ceilings, but for the purposes of this article we’ll compare the full-sized Titan T2 to the T3.)

All about the Titan T2 rack (full size)

Click to see on Amazon

The Titan T-2 is an excellent entry-level rack — affordably priced with super solid construction and a highly reputable brand behind it.

Essentially, this is a standard full-sized cage without a whole lot of bells and whistles. It’s stripped down and very effective at helping you perform basic lifts like squats, deadlifts, rack pulls, bench press, overhead press, pull-ups, and more.

A couple of important things to note about this rack:

  • Weight capacity of 700lbs
  • Total height of 83″ (just under 7′)
  • Pull up bar height is 80″
  • Footprint (floor space) is about 48×48 inches
  • Uprights are made of 2″ powder-coated steel
  • Comes with weight holders at the back of the rack

Overall, the T-2 is a really great entry-level option for your home gym.

I say it’s best for entry-level because the 700lb capacity, while really sturdy, might be something you outgrow eventually. A lot of serious lifters on Reddit and Bodybuilding.com forums write that as you start to become really strong on rack pulls and squats, the rack has trouble keeping up with the weights you’re using.

But for the price, you’ll have a really hard time finding a better power rack.

All about the Titan T3 rack

Click to see on Amazon

If you like Titan racks but want something a little more heavy-duty (and don’t mind putting in a little work… I’ll explain in a second), then the T-3 half rack / squat rack is right up your alley.

It’s not a full cage, but instead has safety arms that jut out for support. This is really best for experienced lifters who know what they’re doing and it gives you a lot of flexibility in terms of the movements you can perform with this piece of equipment.

Here are the key features to note about the Titan T-3:

  • Weight capacity of over 1,000lbs
  • Total height of 92″ (just shy of 8 feet)
  • Pull up bar height is 82″
  • Footprint (floor space) is about 48×48 inches
  • Uprights are made of 3″ powder coated steel
  • Comes with weight holders on the sides of the rack
  • Uses Westside hole spacing (tons of flexibility here)
  • Must be secured to the ground using plywood or some kind of platform

The Titan T3 is really a graduated version of the T2 in half rack form.

It has higher weight capacity (the 1,000lb weight limit should keep you busy for years), it uses higher gauge steel construction, and it has more options for hole spacing and adjusting the safety bars. The half rack style also gives you a little bit less support overall but a lot more flexibility if you’re experienced.

Price Comparison

The good news is that Titan racks are notoriously affordable.

If you’re looking for your first power rack or a good power rack for a budget, you’re in the right place. These can be had for just a couple of hundred bucks.

The T-3 is a lot more heavy duty, and larger overall (despite being a half rack) so it will cost you a little more. But it’s a great value considering the longevity and quality it brings to the table.

Still, if you’re looking for the lowest price option, the T-2 wins out here by a hair.

Edge: Titan T-2

Get the latest price on the Titan T2 or the T3 over on Amazon.

Or check them out over at Titan Fitness for cool color options, accessories, and more.

Size Comparison

Both of these power racks are perfect for garage gyms. But it’s really important that you look closely at the dimensions of each before you buy, otherwise there’s a chance it won’t fit into your home.

Both racks take up equal floor space, at around 48×48 inches. That’s a total of about 16 square feet… perfect for a garage or basement.

The big difference between these racks is the height, however, with the Titan T-3 coming in at a towering 92″ tall (that’s almost a full 8 feet tall… be careful of your ceilings here!)

The Titan T-2 regularly comes in at about 83″ tall, which is a lot more modest and probably a better fit for a basement. The T-2 also comes in a short version that’s only 71″ tall.

If saving space is your game, the Titan T-2 gets the edge for being a little easier to fit in most rooms.

Edge: T-2

Durability & Weight Capacity

Here’s where the T-3 starts to shine.

The T-3 squat rack has a capacity of over 1,000 pounds! That is a lot of weight and should be enough for all but the most elite lifters.

The T-2 can handle about 700 pounds, which is still quite respectable. But if you’re squatting 400-500 pounds or more, you’ll be creeping close to the equipment’s max limit. And you won’t be able to do super heavy rack pulls with this rack either without risking your safety.

If you’re pretty new to lifting or don’t see yourself going super heavy any time soon, the T-2 should suit you fine. But if you have high strength goals or have been training for a while, you’re really going to want the extra capacity of the T3.

Edge: Titan T-3

Features & Hole Spacing Comparison

These two racks have a lot in common despite one being a full cage while the other is a half rack.

They both have a pull-up bar, weight storage, and safety arms. So in many ways, they perform the same overall functions.

One of the key feature differences, however, is the hole spacing on these racks.

The T-3 uses standard Westside hole spacing (there’s a large area in the middle of the supports that features super tight 1″ hole spacing, which gives you an absolute ton of flexibility to perform a spotted bench press, incline press, or other movements at the exact height you need).

This is a huge plus for people who love to bench press inside a rack and push themselves at or near their 1 rep max.

The T-2 hole spacing is quite good, but doesn’t feature the Westside pattern, so you may need to get creative with your bench and/or platform to get the safety bars exactly where you need for the bench press.

Edge: Titan T-3

Get full specs and read reviews for the Titan T2 or the Titan T3 on Amazon.

Or check them out over on Titan Fitness for free shipping and a wider selection.

Reviews Comparison (Customer Impressions)

Both of these power racks have rave reviews, but people who own them are quick to point out the differences.

Newer lifters who aren’t strong enough to push around super heavy weights seem really, really satisfied with the Titan T-2. However, most of the negative reviews of this rack come from people who found it wasn’t sturdy enough to handle their workouts (heavy squats, in particular).

The T-3 has none of these complaints. This thing is built like a tank and is designed to take tons of abuse and handle a lot of weight. The only complaint that popped up from reviewers seemed to be cosmetic (not loving the way the racks looks, or the rack arriving with some dings in the finish).

Reviewers also note that set up of both racks is fairly easy, though it’s important to note you’ll likely need to secure the T-3 squat rack to the floor before lifting heavy.

Edge: T-3

The Verdict

The Titan T2 and T3 are both great power racks, and would be a great addition to any home gym.

You’ll just have to figure out what your specific needs are and buy accordingly.

If you want to keep the budget a little lower, while still getting a great rack, and you’re not super concerned about the 700lb weight capacity, go with the T2! You’re going to love it. As a bonus, it’ll take up a little less room in your home with its shorter stature.

If you’re primarily concerned about getting a heavy duty piece of equipment that you can beat up for years to come, and won’t give way under super heavy weights, you’re going to want to invest a little bit more in the T-3. If you get this rack and install it properly, you’ll be really happy with it for a very long time.

For that reason, I think the overall better value here is the Titan T-3. It’s just hard to beat the sturdiness and function of it at this price point.

Head over to Amazon and get the latest price and more info on the Titan T-3.

Hope this helped!

Titan short power rack

Leave a Reply

Your email address will not be published. Required fields are marked *